This website uses cookies to enable us to offer the best possible user experience. Cookie information is stored in your browser and performs functions such as recognizing you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful. You can adjust all cookie settings by navigating the tabs on the left side.
Turbo 1-2-4 professional machines represent the top-range of Gianni Ferrari collecting units and guarantee SUPERIOR PERFORMANCE UNDER ALL APPLICATIONS.
SAFETY FIRST!!!
These machines have been designed and built with regard to safety and reliability in every working condition. The machine and relevant equipment have been subjected to various tests and checks provided by the EEC regulations for safety, noise, vibrations and electromagnetic emissions. Several devices have been installed on the machine to ensure maximum safety.
MODELS
TURBO 1 – TURBO 1W
COMPACT AND POWERFUL
The latest addition to the range is extremely efficient on flat ground or on areas with slight slopes. A powerful 3 cylinder diesel engine and a large blower allow very high cutting speed and a very good cutting quality even with high, wet grass.
A 1100 litre grasscatcher, together with a high dump elevator (dumping at 2.1 mt) will make your job extremely productive. Very compact, it can easily work with obstacles and narrow paths.
The Turbo 1W is provided with patented HTC™ (Hydrostatic Traction Control) 4 wheel drive for a perfect traction on hard slopes.
TURBO 2 – 4
FOR A MAXIMUM OF EFFICIENCY
Turbo 2 and 4 has the same features as Turbo 1 but with a more powerful 4 cylinder diesel engine and a 1300 litre grasscatcher. Performances in open areas consequently improve: a football field with thick and wet grass can be cut and collected within an hour, with a cutting quality very close to that obtained by a cylinder mower.
The Turbo 4 model features 4 wheel drive and HTC-VD ™ system for perfect drive on even the toughest slopes.
TURBO 2 – 4 CRUISER
OFFERING MAXIMUM COMFORT
The Turbo 2-4 Cruiser models feature a spacious, suspended cabin. The standard featured heating and air conditioning systems, together with electronic transmission control, make the Cruiser extremely comfortable for prolonged use in all weather conditions.
TURBO 4 FIFTY
FOR MAXIMUM TRACTION AND POWER
Unbeatable on areas with strong slopes. The low center of gravity allows safe cutting even on the side of slopes, where competitors’ mowers could not work. A 50 hp engine, a 2-speed transmission that maximizes traction and speed during transfer, a 1400 liter grasscatcher make the machine a top performer.
CUTTING SYSTEM
The collection decks are distinguished by the direction of rotation of the blades, contrary to that of traditional mowers. Reverse rotation, combined with the unique, specifically designed shape of the deck shell, offers a cutting quality close to that obtainable with a cylinder blade mower and also a very high collection capacity without clogging, even with tall and wet grass. A front opening in the housing of the plates makes the edge higher than the cutting level of the blades. This difference in height prevents grass from being flattened, allowing the blades to cut precisely even with long grass. The deck maintains appropriate safety using mobile flaps that open in the presence of tall grass and close with short grass or if struck by objects coming from inside. The mowers are equipped with disks with dual pairs of shockproof swing back blades.
- The swing back blades absorb shocks and protect the transmission against impact with foreign objects left in the grass
- The dual blades prevent the accumulation of grass and soil debris in the top inside part of the mower deck, maintaining cut quality uniform throughout the session, and reducing downtime for cleaning the deck
- The cut material is reduced to very small particles, improving collection and compactionin the grasscatcher
Blade transmission by mechanical reducers with spheroidal cast iron boxes and helical bevel gears in an oil bath is robust and reliable. The discs with shockproof swing back blades protect the transmission against impact with foreign objects left in the grass.
The decks are flat-type to naturally follow terrain contour and therefore obtain a perfect cut. The deck wheels are puncture-proof with full soft rubber tyres. The exclusive cutting height adjustment is set by a single lever, very fast way and without any effort. The total time to vary the cutting height is less than 10 seconds.
The hydraulic lift of the deck to the vertical position enables easy access to the underside of the mower deck, so that maintenance such as blade changing and cleaning are made easy. No manual lifting required. The machine is able to cut and collect grass, along with leaves, paper litter, tins, plastic bottles etc. at a rate of 10,000 to 20,000 sq m/hour with perfect cutting and collecting quality.
| Collection deck | 130 RCA | 150 RCA | 180 RCA |
|---|---|---|---|
| Features | 2 Discs reverse rotation with articulated blades | 2 Discs reverse rotation with articulated blades | 2 Discs reverse rotation with articulated blades |
| Cutting width | 130 cm | 150 cm | 180 cm |
| Dimensions (Lenght/width/height) | 107/134/32 cm | 115/155/32 cm | 118/185/35 cm |
| Adjustable cutting height with lever | From 2 to 8 cm | From 2 to 8 cm | From 2 to 8 cm |
| Weight | 150 kg | 180 kg | 200 kg |
INTEGRATED COLLECTION SYSTEM
The machine features an integrated collection system: the suction turbine and the collection hose are housed inside the traction unit, with many advantages:
- No bulky external collection hoses, keeping the machine compactness. The mower is easy to manoeuvre and can be used in tight spaces and thus increase productivity. With no outer hose obstructions the machine is free to work on both sides to further benefit productivity
- Compared to competitors with outer collection hoses, this machine is more stable and balanced, having a better-placed centre of gravity
- Collection is more effective because the cut grass has to travel a shorter distance, hence no friction losses. In this way no cutting waste is left on the lawn and this also prevents clogging the turbine and collecting duct
STAGE V
| MOD. | TURBO 1 | TURBO 1W | TURBO 2 | TURBO 4 |
|---|---|---|---|---|
| Grasscatcher capacity | 1100 L | 1100 L | 1300 L | 1300 L |
| Maximum emptying height | 210 cm | 210 cm | 220 cm | 220 cm |
| Overhang at maximum height | 30 cm | 30 cm | 35 cm | 35 cm |
TYPE: Built-in turbine-assisted collection – Turbine fan with 6 easily replaceable curved rotor blades
GRASSCATCHER: High impact resistant polyethylene, with anti-clogging audible buzzer warning of full load – Motorised spreader for full packed load – Removable filtering screen for maintenance
STAGE IIIA (Extra UE)
| MOD. | TURBO 2 | TURBO 4 | TURBO 2T | TURBO 4T | TURBO 2T CRUISER | TURBO 4T CRUISER | TURBO 4 FIFTY |
|---|---|---|---|---|---|---|---|
| Grass catcher capacity | 1300 L | 1300 L | 1300 L | 1300 L | 1300 L | 1300 L | 1400 L |
| Maximum emptying height | 220 cm | 220 cm | 220 cm | 220 cm | 220 cm | 220 cm | 230 cm |
| Overhang at maximum height | 35 cm | 35 cm | 35 cm | 35 cm | 35 cm | 35 cm | 30 cm |
TYPE: Built-in turbine-assisted collection – Turbine fan with 6 easily replaceable curved rotor blades
TURBO 4 FIFTY: Turbine fan can be disengaged
GRASSCATCHER: High impact resistant polyethylene, with anti-clogging audible buzzer warning of full load – Motorised spreader for full packed load – Removable filtering screen for maintenance
GRASSCATCHER
The large grasscatcher is made from sturdy impactresistant material and is fitted with a filter, deflector and warning buzzer to indicate when the hopper is full. The filter is easily removable for cleaning. The buzzer advises the operator to disengage the PTO when thehopper is full, to prevent clogging the collecting duct.
The motorised swivel spreader compacts grass and fills the hopper evenly by making the most of its capacity. An efficient and strong hydraulic high-lift dump allows the operator to easily and rapidly discharge the cut grass directly into a truck or a trailer. An exclusive filter minimizes the exit of dust and other material from the collector. It is self cleaning with a hydraulic motor, it operates at each collector dumping, it is easy to wash at the end of the job.
WHEELS
For TURBO1 model, improved also the rear wheel size, moved from 16” to 18” for greater grip on the ground and greater thrust.
STAGE V
| MOD. | TURBO 1 | TURBO 1W | TURBO 2 | TURBO 4 |
|---|---|---|---|---|
| Front wheels size | 23×10.50-12 | 23×10.50-12 | 24×12-12 | 24×12-12 |
| Rear wheels size | 18×8.5-8 | 18×8.5-8 | 20×10- 8 | 20×10- 8 |
STAGE IIIA (Extra UE)
| MOD. | TURBO 2 | TURBO 4 | TURBO 2T | TURBO 4T | TURBO 2T CRUISER | TURBO 4T CRUISER | TURBO 4 FIFTY |
|---|---|---|---|---|---|---|---|
| Front wheels size | 24×12-12 | 24×12-12 | 24×12-12 | 24×12-12 | 24×12-12 | 24×12-12 | 24×12-12 |
| Rear wheels size | 20×10-8 | 20×10-8 | 20×10-8 | 20×10-8 | 20×10-8 | 20×10-8 | 20×10-8 |
DRIVER’S POSITION
Since this is a highly professional machine, intended for extended use during day time, particular attention has been paid to the operator’s seat and control ergonomics to give the driver maximum comfort and safety.
The engine throttle controls and the blade and hydraulic devices (deck lift, collector emptying and lifting) engagement controls are all located near the operator’s right hand and are all easily accessible. Warning lights and level gauges are located on the steering column. The tilt adjustable steering arm always allows the correct drive position to be achieved by the operator and it is extremely comfortable. Access to the seat is unhindered as there are no obstacles between the steering wheel, seat and foot-platform. The foot-platform is mounted on isomounts and is fully adjustable to the vertical position allowing the mower deck to be safely tilted via hydraulic power to vertical. The seat is adjustable in various positions for better comfort 3 heights, full slide, adjustable back and armrests plus weight adjustment from 50 to 130 kg. Standard mounted pneumatic seat on the Turbo 4 Fifty. Also available in warmed model at request.
STEERING WHEEL: Steering wheel with knob and tilt adjustable steering console arm
SEAT: Deluxe Grammer seat with lumbar support and headrest – Adjustable armrest and backrest – Seat heating (optional)
SEAT SUSPENSION: Parallelogram suspension with 3 adjustable height position and driver’s weight adjustment (50 kg to 130 kg) Pneumatic suspension with infinitely variable air-assisted height adjustment (optional but standard on TURBO4 FIFTY)
PROTECTION STRUCTURE (ROPS)
It offers a complete driver protection in case of a machine roll over.
CANOPY FOR ROPS (OPTIONAL)
It provides sun and rain protection and also protects driver from branches when working under trees.
SUPER COMFORT HEATED DRIVER SEAT (OPTIONAL)
The comfort of Turbo range increases also thanks to the availability of Grammer seat in heated version.
TURBO 2T / 4T CRUISER
Cab is suspended on anti-vibration mountings and, due to the usage of electric and electro-hydraulic controls, there is no rigid mechanical linkage between the cab and the machine. Therefore the driver’s seat is completely insulated from the traction unit. The use of special mats provides further insulation.
With high capacity airconditioning the Turbo Cruiser cab ensures excellent ergonomics and comfort in any climatic situation.
- Cab suspended on 4 isomounts, these isolate the driver’s seat from the machine chassis and engine
- ONLY 2 meter high
- Receding and rounded ROPS cab shape allows easy operation under trees
- Headlights (high/low beam), turn signals, mirrors and beacon for on- road use
- Wide safety glass surface for maximum visibility and safety
- Easy safe access from both sides. Easily removable doors as well
- Complete and rational easy-toread controls and gauges on the dashboard
- Easy to reach coolers for hydraulic oil and air conditioning
- Electrically servo-controlled foot pedals allow hours of effortless use
- Plentiful vents for optimal airflow distribution
- Steering column with heightn and tilt adjustment to fit any operator
- Amplified stereo speakers with connection for an MP3 player
- Engine mounted air conditioning powerful compressor (optional)
- Air conditioning, heating system and 12V electric socket (cigarette lighter receptacle)
- Hydraulically lifting cab, even when engine is not running, for easy access to all parts below
A. Electronic cruise control (speed limiter) to set the top speed
B. Throttle lever with Eco-Drive™ for a more efficient and quiet use
C. PTO button
D. Ignition key switch
E. Hydraulic controls
2WD TRANSMISSION (TURBO 1 – TURBO 2)
The front axle consists of a differential assembly that connects two reduction gears in oil baths, which transmit the drive to the wheels. The transmission system is very efficient as the hydraulic axial piston motor ensures high performance. In difficult conditions (uneven ground, slopes or poor grip) the mechanical differential with 100% lock ensures that all the available axle torque is transmitted to the wheel offering better grip, always ensuring excellent traction.
4WD TRANSMISSION (TURBO 1W – TURBO 4)
In addition to the front mechanical axle, the Turbo 4 models are equipped with a rear mechanical axle with oil bath gearboxes driven by an additional piston engine. Dual traction on the Turbo 1W is obtained with 2 orbital wheel motors on the rear axle.
In both cases the absence of a transmission shaft between the front and rear axles allows the low engine to be housed between the axles so that the machine achieves an optimal center of gravity that greatly benefits it. This configuration also allows independent control of the speed of the two axes thanks to the HTC devices to ensure reduced turning radius, no sliding and optimal drive in all conditions.
STAGE V
| MOD. | TURBO 1 | TURBO 1W | TURBO 2 | TURBO 4 |
|---|---|---|---|---|
| Driving wheels | 2WD | Permanent 4WD | 2WD | Permanent 4WD |
| Transmission type | Orbital motors on rear wheels | Front axle piston motor | ||
| Max. speed | 13 km/h | 13 km/h | 15 km/h | 10-18 km/h (2 speeds) |
| Cruise control (speed limiter) | ✔ | ✔ | ✔ | ✔ |
| Traction control | HTC™ System | HTC-VD™ System |
TRANSMISSION TYPE: Variable displacement axial piston pump – Axial piston motor on front gear drive axle
TRACTION CONTROL: Mechanical differential lock on front axle
STAGE IIIA (Extra UE)
| MOD. | TURBO 2 | TURBO 2T | TURBO 4 | TURBO 4T | TURBO 2T CRUISER | TURBO 4T CRUISER | TURBO 4 FIFTY |
|---|---|---|---|---|---|---|---|
| Driving wheels | 2WD | 2WD | Permanent 4WD | Permanent 4WD | 2WD | Permanent 4WD | Permanent 4WD |
| Max. speed | 18 km/h | 18 km/h | 18 km/h | 18 km/h | 20 km/h | 20 km/h | 12-24 km/h (2 speeds) |
| Cruise control (speed limiter) | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| Traction control | HTC-VD™ System | HTC™ System | HTC™ System | HTC-VD™ System |
TRANSMISSION TYPE: Variable displacement axial piston pump – Axial piston motors with deep reduction gears on both front and rear gear drive axles (only for 4WD models)
TRACTION CONTROL: Mechanical differential lock on front axle
ALL MODELS
Forward – reverse motion: 2 pedals (forward foot pedal + reverse foot pedal) – Dynamic Engine Control (DEC™), except for Cruiser
Brakes: Hydrostatic service brake (neutral position). Disc parking brake on front axle
Steering system: Power steering wheel, reduced-radius steering on rear wheels
Power Take-Off Type/Engagement: Mechanical, with PTO shaft / Electro-hydraulic engagement by PTO button
ENGINES AND STAGE V ADVENT
With the coming of new STAGE V normativites, Gianni Ferrari, for UE Countries,increase the offer range with new models TURBO1, 2 and 4WD, TURBO2 e TURBO4 with Kubota 1300-1500 engines, 26 Hp until 2750 rpm. In particular, on Turbo 1 e 1W models, elaborate and careful studies on the mechanical and hydraulic transmission have led to improve its traction by 15-20%. KubotaD1305 Diesel engine, 3 cyl., 26 Hp-2750 rpm ensures an exceptional torque of 80Nm @ 1700 RPM and a significant lowering of the noise.
STAGE V
| MOD. | TURBO 1 | TURBO 1W | TURBO 2 | TURBO 4 |
|---|---|---|---|---|
| Fuel | Diesel | Diesel | Diesel | Diesel |
| Model | Kubota D1305 | Kubota D1305 | Kubota V1505 | Kubota V1505 |
| Power / Cylinder capacity | 26 hp / 1261 cc. | 26 hp / 1261 cc. | 26 hp / 1498 cc. | 26 hp / 1498 cc. |
| N° Cylinder / Cooling | 3 / Liquid | 3 / Liquid | 4 / Liquid | 4 / Liquid |
| Fuel tank capacity | 40 L | 40 L | 40 L | 40 L |
FITTINGS: Pressure lubrication system with gear pump – Fuel filter with prefilter – Cyclone-type air filter with self cleaning prefilter
WEIGHT AND DIMENSIONS (machine, elevator and grasscatcher)
| Unloaded weight | 810 kg | 860 kg | 860 kg | 920 kg |
| Length / Width / Height* | 250 x 124 x 185 [199] cm | 250 x 124 x 185 [199] cm | 280 x 125 x 186 [200] cm | 280 x 125 x 186 [200] cm |
*with ROPS down [up]
STAGE IIIA (Extra UE)
| MOD. | TURBO 2 | TURBO 4 | TURBO 2T | TURBO 4T | TURBO 2T CRUISER | TURBO 4T CRUISER | TURBO 4 FIFTY |
|---|---|---|---|---|---|---|---|
| Fuel | Diesel | Diesel | Diesel | Diesel | Diesel | Diesel | Diesel |
| Model | Kubota V1505 | Kubota V1505 | Kubota V1505-T | Kubota V1505-T | Kubota V1505-T | Kubota V1505-T | Kubota V2403-M |
| Power / Cylinder capacity | 36 hp / 1498 cc. | 36 hp / 1498 cc. | 44 hp / 1498 cc. | 44 hp / 1498 cc. | 44 hp / 1498 cc. | 44 hp / 1498 cc. | 50 hp / 2.434 cc. |
| N° Cylinder / Cooling | 4 / Liquid | 4 / Liquid | 4 / Liquid | 4 / Liquid | 4 / Liquid | 4 / Liquid | 4 / Liquid with self-cleaning radiator |
| Fuel tank capacity | 40 L | 40 L | 40 L | 40 L | 40 L | 40 L | 40 L |
| Eco-Drive™ mode | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
FITTINGS: Pressure lubrication system with gear pump – Fuel filter with prefilter – Cyclone-type air filter with self cleaning prefilter
WEIGHT AND DIMENSIONS (machine, elevator and grasscatcher)
| Unloaded weight | 860 kg | 920 kg | 860 kg | 920 kg | 1300 kg | 1300 kg | 1120 kg |
| Length / Width / Height* | 280x125x186 [200] cm | 280x125x186 [200] cm | 280x125x186 [200] cm | 280x125x186 [200] cm | 300x125x202 cm | 300x125x202 cm | 300x125x202 cm |
*with ROPS down [up]
ELECTRICAL SYSTEM ALL MODELS
Battery: 12 V / 70 Ah – battery isolator master switch as standard (12V / 100 Ah on TURBO4 FIFTY)
Safety sensors: EEC European Standard / ISO
Standard equipment: ECU for diagnostic on safety systems and fault sensing – Hour counter – Rev counter – Fuel level – Coolant temperature gauge – Road legal light kit with rotating beacon – Hydraulic front linkage with 2 arms
SMART SYSTEM
THE LAST PATENT
GF3x1PLUS is the first mower entirely manufactured at Gianni Ferrari and is already known by many experts in this field and green area maintenance workers.
This innovative equipment includes, as per standard, the availability of 3 blade kits (Y, spoon and vertical) to excel in its use and guarantee great mowing work even with difficult and very high grass on uncultivated lands, fantastic mulching over elegant and well kept lawns, with the important option, in both cases, of also being able to collect the cut grass.
October 2019 is the date when Gianni Ferrari starts the production of his GF3x1PLUS enhanced with SMART SYSTEM technology, the latest patent filed after long studies and intense field tests.
It is a reinforced rotor with blade locking magnetic pins that cannot be moved out of the way even if it accidentally comes into contact with stones and/or large shrubs.
Supplied with the tool, Gianni Ferrari provides a steel tool specifically designed to change the blades in the field in a maximum of 15 minutes or, at the same time, to quickly combine the vertical blades with the other two types of blades in order to include a perfect soil aeration job.
EQUIPMENTS
INLINE™ REAR DISCHARGE/MULCHING DECK
The mulching and rear discharge decks have 3 or 4 rotors aligned on the same axis and synchronized with oil bath gear transmission. Compact design with front overhang included to better follow bumps and depressions of the ground. The Dual-Cut™ rapid conversion system allows you to change the type of cutting, mulching or rear dumping in a moment, simply by using a convenient lever.
| Deck Inline™ | 130 Inline™ | 165 Inline™ | 190 Inline™ Dual Cut™ |
|---|---|---|---|
| Features | 3 discs with articulated blades | 4 discs with articulated blades | 4 discs with articulated blades |
| Cutting width | 130 cm | 165 cm | 185 cm |
| Dimensions (Lenght/width/height) | 103/135/30 cm | 105/165/30 cm | 110/195/34 cm |
| Adjustable cutting height with lever | From 2 to 8 cm | From 2 to 8 cm | From 2 to 8 cm |
| Weight | 120 Kg | 190 kg | 230 kg |
DUAL CUT™ MULCHING/REAR DISCHARGE DECK
Deck with three triangle-disposed blades and belt drive are the only one on the market to feature maintenance-free blades with tapered bearings and oil batch lubrication for maximum durability. Can be positioned vertically.
| Cutting width | 160 cm |
| Dimensions (Lenght/width/height) | 115/162/40 cm |
| Adjustable cutting height with lever | From 3 to 9 cm |
| Weight | 200 kg |
SIDE DISCHARGE/MULCHING DECK
Deck with exceptional performances, strong and safe even in hard working conditions and excellent on high quality grass. Cutting system 2 counter rotating discs with shock absorbing swing back blades.
| Cutting width | 130 cm |
| Dimensions (Lenght/width/height) | 103/152/32 cm |
| Adjustable cutting height with lever | From 1 to 9 cm |
| Weight | 110 kg |
MULCHING/REAR DISCHARGE DECK
Deck with 3 blades with V-belt transmission. Can be positioned vertically.
| Cutting width | 150 cm |
| Dimensions (Lenght/width/height) | 105/160/36 cm |
| Adjustable cutting height with lever | From 3 to 9 cm |
| Weight | 185 kg |
COLLECTING MOWER
With a special configuration of the frame of deck, it is the best equipment for leaf and pine needles collection.
| Cutting width | 130 cm |
| Dimensions (Lenght/width/height) | 110/135/30 cm |
| Weight | 120 kg |
FLAIL MOWER 1200
With a working width of 120 (for Turbo 1) or 150 cm (for Turbo 2-4) this heavy duty flail mower is ideal for use on fine grass, weeds and dry twigs.
| Cutting width | 120 cm |
| Dimensions (Lenght/width/height) | 138/150/48 cm |
| Weight | 185 kg |
FLAIL MOWER 1600
With a working width of 120 (for Turbo 1) or 150 cm (for Turbo 2-4) this heavy duty flail mower is ideal for use on fine grass, weeds and dry twigs.
| Cutting width | 150 cm |
| Dimensions (Lenght/width/height) | 154/177/53 cm |
| Weight | 240 kg |
FLAIL MOWER WITH COLLECTION GF3x1 Plus SMART SYSTEM
Entirely produced in Gianni Ferrari, the new Flail mower is indicated both for cutting fine grass (spoon blades) and for cleaning rustic areas in presence of brushwood (Y-blades). With also vertical blades combined with the previous ones, it aerates the ground during the work. Three types of work with a single equipment.
| Cutting width | 135 cm |
| Standard equipment | Spoon blades and vertical blades kit (28 blades) |
| Dimensions (Lenght/width/height) | 130/157/50 cm |
| Adjustable cutting height with lever | From 0,5 to 8 cm |
| Weight | 280 kg |
| Cutting width | 155 cm |
| Standard equipment | Spoon blades and vertical blades kit (50 blades) |
| Dimensions (Lenght/width/height) | 130/180/50 cm |
| Adjustable cutting height with lever | From 0,5 to 8 cm |
| Weight | 345 kg |
SINGLE-STAGE SWEEPER WITH COLLECTION
It is the ideal tool for collecting leaves, waste paper, tin cans and plastic bottles on any kind of surface. It is equipped with 2 hydraulic motors, composite brushes plastic/steel and electrical side-shifting of floating brushes. The vacuum hose (5 meters) can be directly fitted to the sweeper without any tools. An exclusive filter minimizes the exit of dust and other collected material. It is self cleaning with a hydraulic motor after each collector dumping. Easy to wash at the end of the job.
| Working width | 150 cm |
| Brush diameter | 60 cm |
| Optional | 2 water tanks holding 100 litres with 3 spraying nozzles 2 front wheels for use on pebbles or soft terrain. |
| Dimensions (Lenght/width/height) | 117/157/45 cm |
| Weight | 125 kg |
TWO-STAGE COLLECTION SWEEPER
Excellent equipment for cleaning land of any surface, squares and sidewalks. Ideal for collecting paper, leaves and other waste. It has V-belt transmission and double brushes.
| Working width | 150 cm |
| Brush diameter | 60 cm |
| Optional | 2 water tanks holding 100 litres with 3 spraying nozzles |
| Dimensions (Lenght/width/height) | 135/150/32 cm |
| Weight | 120 kg |
CLEANING SYNTHETIC GRASS BRUSH
It can be used for the brushing and cleaning of artificial grass infilled with rubber granules and/or sand. Also suitable for cleaning athletic fields and tracks in tartan. The sweeper straightens the fibres and removes dirt which is then collected in the grasscatcher. Hydraulic angling ± 30°.
| Working width | 100 cm |
| Brush diameter | 50 cm |
| Dimensions (Lenght/width/height) | 150/123/31 cm |
| Weight | 98 kg |
| Operating width | 100 cm |
| Brush diameter | 50 cm |
| Dimensions (Lenght/width/height) | 155/105/52 cm |
| Weight | 124 kg |
VACUUM HOSE
It can be used in all seasons to vacuum dry leaves, pine needles, pollen tangles to easily clean public and private areas, sidewalks and parking lots.
| Lenght | 500 cm |
| Diameter | 16 cm |
| Weight | 10,5 kg |
SNOW BLADE
Hydraulically liftable and adjustable, the snow blade makes the use of Turbo machines productive also in winter.
| Working width | 175 cm |
| Dimensions (Lenght/width/height) | 131/180/65 cm |
| Weight | 150 kg |
SNOW THROWER
Two-stage snow thrower 130 cm with hydraulic rotation and plexiglass windscreen for the user.
| Working width | 130 cm |
| Optional | Plexiglass screen |
| Dimensions (Lenght/width/height) | 160/142/148 cm |
| Weight | 160 kg |
SALT SPREADER
It could spread salt, sand, grit, manure and granulates of different kind and weight, covering surfaces from pavements to roads. Made by anti-corrosion material, it is composed by a distributor, spreading deck in stainless steel and polyethylene basket.
| Capacity | 110 L | 170 L |
| Spreading width | from 80 to 600 cm | from 80 to 600 cm |
| Dimensions (Lenght/width/height) | 60/50/108 cm | 63/70/115 cm |
| Weight | 40 kg | 65 kg |